AR68.30-W-7607C | Remove/install front headliner | 7.7.10 |
MODEL 374.5 with BODY 374.860 except CODE (DD5) Cab with high roof
MODEL 374.6 with BODY 374.870 except CODE (DD5) Cab with high roof
MODEL 375.1 with BODY 375.850 except CODE (DD5) Cab with high roof
MODEL 375.3 with BODY 375.820 except CODE (DD5) Cab with high roof
MODEL 375.4 with BODY 375.860 except CODE (DD5) Cab with high roof
MODEL 374.6, 940, 942, 943, 944 with BODY 944.890 except CODE (DD5) Cab with high roof
MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.890 except CODE (DD5) Cab with high roof
MODEL 958.0 with BODY 958.860
except CODE (DD5) Cab with high roof
with CODE (XV0) Global cockpit
MODEL 958.2 with BODY 958.870
except CODE (DD5) Cab with high roof
with CODE (XV0) Global cockpit
MODEL 958.4 with BODY 958.880 except CODE (DD5) Cab with high roof
MODEL 970, 972, 974, 975, 976 with BODY 972.890 except CODE (DD5) Cab with high roof
W68.30-1094-06
Shown on body 972.890 with
code (HZ3) Warm air auxiliary heater, 2000 W and with code (D25) Roof hatch/vent flap
1 Cover
2 Implement carrier
3 Front headliner
4 Clips
5 Edge protection strip
6 Center curtain rail
7 Door seal
8 Grab handle
9 Stowage boxes
10 Sun visors
11 Screw
E12 Left front body outline lamp
E13 Right front body outline lamp
E27 Driver interior lamp
E28 Front passenger interior lamp
P1 Tachograph
S61 Timer
W68.30-1092-03
Shown on body 972.890
12 Side paneling
13 Side paneling
X124.1 Driver side roof connector
X124.2 Driver side roof connector
X125.1 Passenger side roof connector
W68.30-1141-03
Modification notes
| Remove/install | ||
1 | Turn off ignition | ||
2 | Remove front curtain rail | Only on vehicles with code (F04) L cab (long). | |
3 | Remove upper paneling on left and right A-pillar | ||
4 | Remove side paneling (12, 13) from instrument panel | ||
5 | Remove center curtain rail (6) | ||
6 | Open roof hatch on both sides | Only on vehicles with code (D25) Roof hatch/vent flap. | |
7 | Remove cover from sliding roof motor | Only on vehicles with code (D27) Electric steel tilting/sliding roof. | |
8 | Disconnect electrical connector from controller unit on sliding roof motor | Only on vehicles with code (D27) Electric steel tilting/sliding roof. | |
9 | Remove edge protection strip (5) | ||
10 | Remove grab handle (8) above front passenger door | ||
11 | Remove grab handle next to roof hatch | Only on vehicles with grab handle. | |
12 | Remove tachograph (P1) | ||
13 | Remove all other electrical units installed in equipment carrier (2) | ||
14 | Disconnect driver side roof connectors (X124.1, X124.2) and passenger side roof connector (X125.1) | ||
15 | Remove roof electric wiring harness from | ||
16 | Remove left clearance lamp (E12) and right clearance lamp (E13) | ||
17 | Remove clips (4). | | |
18 | Remove bolt (11) | ||
19 | Remove sun visors (10) | ||
20 | Loosen door seal (7) in area of right and left front paneling (3) | ||
21 | Partially remove bracket on center curtain rail (6) | Only when center curtain rail (6) is fastened with sheet metal screws. | |
22 | Remove front headliner (3) | | |
23 | Install in the reverse order |
655 589 07 63 00
Pulling hook
Mounting wedge
110 589 03 59 00
Referenced documents
- ar5461w0005a Remove/install tachograph
- ar6810w1503a Remove/install side paneling on dashboard
- ar6830w4050c Remove/install paneling on A-pillar
- ar6850w5600c Remove/install curtain rail
- ar6850w5610c Remove/install center curtain rail