Series
en
ar6830w4050c
Remove/install paneling on A-pillar
Type ar · topic 68.30 · version 0201 · 2014-01-22
Applies to: MODEL 374.5 with BODY 374.860 MODEL 374.6 with BODY 374.870 MODEL 374.6, 940, 942, 943, 944 with BODY 944.890 MODEL 375.1 with BODY 375.850 MODEL 375.3 with BODY 375.820 MODEL 375.4 with BODY 375.860 MODEL 950.5/6, 952.5/6, 953.6, 954.5 with BODY 940.890 MODEL 970, 972, 974, 975, 976 with BODY 972.890
Where it sits
Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 374 (models 5**, 6**, 860, 870) · Series 375 (models 1**, 3**, 4**, 820, 850, 860) · Series 940 · Series 942 · Series 943 · Series 944 · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976
EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 374 (models 5**, 6**, 860, 870) · Series 375 (models 1**, 3**, 4**, 820, 850, 860) · Series 940 · Series 942 · Series 943 · Series 944 · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976
AR68.30-W-4050C
Remove/install paneling on A-pillar
10.01.2014
MODEL
374.5 with BODY 374.860
MODEL
374.6 with BODY 374.870
MODEL
374.6, 940, 942, 943, 944 with BODY 944.890
MODEL
375.1 with BODY 375.850
MODEL
375.3 with BODY 375.820
MODEL
375.4 with BODY 375.860
MODEL
950.5/6, 952.5/6, 953.6, 954.5 with BODY 940.890
MODEL
970, 972, 974, 975, 976 with BODY 972.890
1
Grab handle
2
Door seal
3
Upper paneling
4
Cap
5
Screw
6
Lower paneling
7
Left footwell cover, driver side
8
Footrest
Remove/install
1
Remove driver side left footwell cover (7) and footrest (8)
AR68.30-W-1310-02C
2
Remove footwell cover on front passenger side
AR68.30-W-1300C
3
Remove support rod from A-pillar (1)
AR68.70-W-0302C
4
Loosen door seal (2) at A-pillar
5
Remove upper lining (3) from A-pillar
The upper paneling (3) is clipped.
Mounting wedge
*110589035900
6
Remove lower paneling (6) on A-pillar
The lower paneling (6) is inserted.
7
Install in the reverse order
Referenced documents
