Additional operations when replacing A-pillar trim

AR68.30-S-4050-02C

Additional operations when replacing A-pillar trim

Model

415

with code J67 (Anti-theft alarm system)

1

Mark position of passage (5) on ultrasonic sensor of anti-theft alarm (ATA) on A-pillar paneling (2).

 Dimensions:
a = 15 mm
B = 15 mm

2

Drill passage (5).

 The diameter of passage (5) is 6 mm.

Shown on left A-pillar paneling (2)

3

Position retaining plate (4) on A-pillar paneling (2) as shown and tighten with bolt (3).

 The top edge of the retaining plate (4) should be parallel to the top edge of the A-pillar paneling (2).

4

Guide electrical wiring harness on ultrasonic sensor (1) through passage of A-pillar paneling (2).

5

Clip ultrasonic sensor (1) to retaining plate (4).

Shown on left A-pillar paneling (2)