Removing and installing front headliner

AR68.30-P-7607MP

Removing and installing front headliner

13.7.01

 

Remove, Install



Before opening and closing the center door open front and rear door. Center door should be slammed, not pushed closed.



Protect interior equipment and floor covering against contamination and damage.

1

Remove key from electronic ignition/starter switch control module

With keyless Go code 889:

Press start/stop button until zero position is activated.

2

Remove left and right A-pillar paneling (1)

AR68.30-P-4050M

3

Remove left and right B-pillar paneling (2)

AR68.30-P-4700MP

4

Remove edge guard (3) of driver's compartment door cutouts in area of front headliner (4).

5

Remove dividing wall paneling (5)

In upper driver's compartment

AR68.30-P-1400MB

6.1

Separate left and right curtain control cable (10) from upper curtain rail (9)

With electrically adjustable curtains, code P082.

 The separation points (arrow) of the curtain rail control cables (10) are accessible through the recess in the adjustment plate (1) when the center doors are open.

 The curtain rail control cable halves of the upper curtain rail (9) are marked with yellow strips of adhesive tape.

Installation: Observe routing of curtain control cable halves

7

Remove overhead control panel control module (N70)

AR82.20-P-1000M

8

Remove rearview mirror (6).

AR68.40-P-0001M

9

Remove sun visors (7)

10

Remove handles (8)

11

Disconnect electrical connectors in area of B-pillars and remove front headliner (4) through passenger door opening

12

Install in the reverse order