Remove/install paneling on B-pillar

AR68.30-P-4700MP

Remove/install paneling on B-pillar

18.1.10

 

Remove/install



Before opening and closing the center door open front and rear door. Center door should be should be slammed, not pushed closed.



Protect interior equipment and floor covering against contamination and damage.

1

Move left and right front seat to front-most position.

2

Remove paneling from dividing wall

In upper driver's compartment (1a).

AR68.30-P-1400MA

In bottom driver's compartment (1b).

AR68.30-P-1400MB

In passenger compartment (1c).

AR68.30-P-1400MC

3

Unscrew belt end fitting (2)



*BA91.40-P-1001-01A

4

Remove cover (3) upward from left and right entrance

5

Remove edge guard (4) in area of B-pillar paneling (5).

6

Press B-pillar paneling (5) out of retaining clips (6) with screwdriver

7

Remove B-pillar paneling (5) and move belt out of B-pillar paneling

 Installation:Driver bolt (7) should be positioned in the recess (8) of the belt height adaptation cover (9).

 Installation: Check belt height adaptation cover for proper function.



Checking

8

Check retaining clips (6) for deformation and damage.

 Replace deformed and damaged retaining clips.

9

Check belt height adaptation cover (9) for easy motion

 When hard to move or when noises occur:

Grease guides for belt height adaptation cover

Optimol Optitemp PU 035/4

*BR00.45-Z-1037-06A

10

Install in the reverse order

Number

Designation

Model
220

BA91.40-P-1001-01A

Screw on belt end fitting

Nm

30

Number

Designation

Order number

BR00.45-Z-1037-06A

Optimol Optitemp PU 035/4

-