AR68.30-P-1400MA | Remove/install paneling for dividing wall | 28.8.01 |
MODEL 220.875 /878
in driver's compartment at bottom
P68.30-2448-06
1 Release lever for center door
2 Screw
3, 4 Paneling for dividing wall, left, right side section
5 Control cable for center door
6 Bolts
7 Clips
8 Bolts
9 Paneling for dividing wall, center section
| Remove, Install | ||
| Protect interior equipment and floor covering against dirt and damage | ||
1 | Move left and right front seat to front-most position | ||
2 | Remove left and right center door release lever (1) | For this purpose unscrew screw (2), remove center door release lever (1) upward from left and right side section of dividing wall paneling (3, 4) and unhook center door control cable (5) from center door release lever (1). | |
3 | Unscrew screws (6) from left and right side section of dividing wall paneling (3, 4) | ||
4 | Remove left and right side section from dividing wall paneling (3, 4) | Installation: Check clips (7) for damage, replace if necessary. | |
5 | Unscrew screws (8) | ||
6 | Remove center section from dividing wall paneling (9) | Installation: Check clips (7) for damage, replace if necessary. | |
7 | Install in the reverse order |