ar6830p4810h

Remove/install center paneling in trunk

Type ar · topic 68.30 · version 0104 · 2020-01-30

Applies to: Model 240

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 240

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.34 Trunk lining — Series 240

AR68.30-P-4810H

Remove/install center paneling in trunk

10.01.2020

Model

240

Remove/install center paneling in trunk

1

Center paneling trunk

3

Expansion rivet

4

Trunk seal

E18/1

Left rear shelf luggage compartment lamp

E18/3

Right rear shelf luggage compartment lamp

P68.30-2601-02

Remove/install

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground line

AR54.10-P-0003H

Topical note

Notes on battery

AH54.10-P-0001-01A

2

Remove side paneling in trunk

AR68.30-P-4800H

Left and right side.

3

Release trunk seal (4) in area of center trim (1)

4

Unclip left (E18/1), right (E18/3) rear shelf trunk lamp and disconnect electrical connectors

5

Remove expansion rivets (3)

See enlarged detail. Four pieces.

6

Remove center trim in trunk (1)

7

Install in the reverse order

Referenced documents