P68.30-2856-09
1 Rear center section paneling
2 Spare wheel recess cover
3 Expanding clip
4 Expanding clip
5 Rubber stop
E18/5 Left trunk lamp
S69/10 Trunk partition "closed" limit switch
6 Bolts
7 Electrical connectors
8 Side trunk paneling
9 Mounting wedge
| Remove/Install | ||
1 | Open trunk lid | ||
2 | Remove spare wheel recess cover (2) from trunk | ||
3 | Remove expanding clips (3) | Pliers Dismantle rear clip | |
Installation: Replace damaged expanding clips (3). | |||
4 | Remove expanding clips (4) | Installation: Replace damaged expanding clips (4). | |
5 | Remove rubber stops (5) | Installation: Replace damaged rubber stops (5). | |
6 | Open bolt covers (6) with suitable screwdriver and unscrew bolts (6) | ||
7 | Loosen rear center section paneling (12) from left and right side trunk paneling (8) with mounting wedge (9) | | |
Installation: Observe installation position of rear center section paneling (1) in left and right side trunk paneling (8) | |||
8 | Unclip left trunk lamp (E18/5) from rear center section paneling (1) toward front and guide through opening in rear center section paneling (1) | Do not disconnect electrical connector on left trunk lamp (E18/5). | |
9 | Unclip trunk partition closed limit switch (S69/10) from rear center section paneling (1) | Do not disconnect electrical connector from trunk partition closed limit switch (S69/10). | |
10 | Remove rear center section paneling (1) from rear center section | ||
11 | Install in the reverse order |
Mounting wedge
110 589 03 59 00
Commercially available tools