ar6830p4780ma

Removing and installing side paneling in rear

Type ar · topic 68.30 · version 0100 · 2002-03-11

Applies to: MODEL 220.875 /878 Side paneling

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 220 (models 875, 878)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 220 (models 875, 878)

AR68.30-P-4780MA

Removing and installing side paneling in rear

9.7.01

MODEL 220.875 /878
Side paneling

Removing and installing side paneling in rear

P68.30-2451-12

1 Seat cushion

2 Screw

8 Side paneling

Removing and installing side paneling in rear

P68.30-2452-06

3 Side section

4 Screw

5 Center door

6 Screw

7 Adjustment plate

8 Side paneling

Remove, Install

Before opening and closing the center door open front and rear door. Center door should be slammed, not pushed closed.

Protect interior equipment and floor covering against contamination and damage.

1

Remove left and right seat cushion (1) from face-to-face seat

The removal of the rear seat cushion is the same as for the rear seat and face-to-face seat

AR91.12-P-1020M

2

Unscrew screw (2)

3

Remove left and right side section (3) of dividing wall paneling.

In bottom driver's compartment

AR68.30-P-1400MA

4

Unscrew screw (4)

5

Open center door (5) and unscrew screw (6) from adjustment plate (7)

6

Remove side paneling (8)

7

Install in the reverse order

Referenced documents