Remove/install rear wall paneling · ar6830p4750v · Mercedes-Benz WIS

AR68.30-P-4750V

Remove/install rear wall paneling

3.2.04

MODEL 171.4

P68.30-2953-09

1 Rear paneling

2 Center console

3 Edge guard

4 Draft stop bracket

8 Plug clip

9 Roll bar paneling

10 Upper center pillar paneling

5 Clip

6 Stowage net

7 Bracket

 	Remove/Install
1	Open Vario roof	 See Operating Instructions
2	Remove center console (2)		AR68.20-P-2000V
3	Remove left and right door sill molding		AR68.30-P-4100V
4	Remove left and right edge guard (3) and loosen rear paneling (1) from clips (5) with mounting wedge		*110589035900
5	Unscrew left and right draft stop bracket (4) by hand
6	Unclip stowage net (6) from bracket (7) and remove clip (8)
7	Loosen rear upper paneling (1) from guides (arrow A) for roll bar paneling (9) and left and right upper center pillar paneling (10)	 Installation: Ensure that rear paneling (1) is seated correctly in guides (arrow A).
8	Loosen rear paneling (1) at bottom of Velcro strip (arrow B) and in area of stowage net and remove from vehicle	 Installation: Ensure that rear paneling (1) is seated correctly on Velcro strip. Observe (arrow B) and in area of stowage net (6).
9	Install in the reverse order

Mounting wedge

110 589 03 59 00