ar6830p4703xg

Remove/install upper B-pillar trim

Type ar · topic 68.30 · version 0100 · 2018-06-11

Applies to: Model 463 as of model year 2019

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 463

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 463

AR68.30-P-4703XG

Remove/install upper B-pillar trim

20.03.2018

Model

463

as of model year 2019

Remove/install upper B-pillar trim

Shown on left side of vehicle

1

Trim at the top of B-pillar

2

Edge guard

3

Air duct

4

Retaining tab

5

Guide

6

Support

7

Cover

P68.30-4054-06

Remove/install

1

Disconnect ground line of battery.

AR54.10-P-0003XG

2

Remove the trim at the bottom of the B-pillar.

AR68.30-P-4704XG

3

Remove the seat belt end-fitting tensioner.

AR91.40-P-1030-02XG

4

Loosen the edge guard (2) in the area of the trim at the top of the B-pillar (1).

Installation: Ensure that the edge guard (2) is seated correctly.

5

Unclip the trim at the top of the B-pillar (1) at the retaining tabs (4) and pull downwards until the guides (5) are free.

Installation: Position the mount (6) for the trim at the top of B-pillar (1) on the screw for the seat belt guide bracket.

6

Unclip the cover (7), guide the seat belt out and remove the trim at the top of the B-pillar (1).

7

Remove the air duct (3) from the trim at the top of the B-pillar (1).

When you are replacing the trim at the top of the B-pillar (1).

8

Install in reverse order.

Referenced documents