AR68.30-P-4620T | Remove/install spare tire well paneling | 19.4.06 |
MODEL 211.2 up to 31.5.06 except CODE (943) Automatically extendable main loading floor
P68.30-2754-09
1 Spare tire well paneling
2 TIREFIT box
3 Bolts
4 Tool box
8 Expansion clip
9 Fuse
10 Gas-operated strut
5 Mounting wedge
6 Battery cover
7 Clamp
| Remove/install | ||
1 | Remove trim from rear end center assembly | ||
2 | Remove TIREFIT holder (2) or spare wheel from spare wheel recess. | Depending on vehicle configuration. | |
3 | Unscrew bolts (3) from tool box (4) | ||
4 | Unclip tool kit (4) upward from spare wheel recess with assembly wedge (5) and remove. | | |
5 | Remove battery cover (5) and remove both clips (7). | ||
6 | Remove expansion clips (8) | | |
Danger! | Risk of injury caused by body parts being pinched or crushed when working on gas-operated struts under tension | Only remove and install gas-operated struts when they are not under tension and when the components are properly secured. | |
7 | Lift retainer (9) with suitable screwdriver and remove gas pressure strut (10) from spare wheel recess. | Do not remove retainer (9), otherwise tension on retainer (9) can be lost | |
Installation: Install gas-operated strut (10) with retainer (9) installed. | |||
8 | Remove spare tire well paneling (1) from spare tire well | ||
9 | Install in the reverse order |
Wedge tool
110 589 03 59 00
Commercially available tools
Referenced documents
- ar6830p4785ta Remove/install paneling on rear center section
- as0000z001201a Risk of injury from fingers being pinched or jammed when working on gas struts under pressure