ar6830p4785ta

Remove/install paneling on rear center section

Type ar · topic 68.30 · version 0200 · 2006-05-05

Applies to: MODEL 211.2

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 211 (models 2**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.34 Trunk lining — Series 211 (models 2**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.35 Load compartment trim — Series 211 (models 2**)

AR68.30-P-4785TA

Remove/install paneling on rear center section

19.4.06

MODEL 211.2

Remove/install paneling on rear center section

P68.30-2655-07

Shown on vehicle with code (943) Automatic extendable main loading floor

1 Rear center section paneling

2 Bolts

4 Load compartment floor lock

3 Striker eye flap

Modification notes

30.3.06

"Remove/install side paneling in load compartment" added

Step 1

Remove/install

1

Remove left side paneling in load compartment

AR68.30-P-1180T

2

Open load compartment floor upwards

3

Unscrew screws (2) from rear center section paneling (1).

4.1

Unscrew mounting screws on loading floor lock (4).

On vehicles without code (943) Automatic extendable main loading floor

5

Remove rear center section paneling (1) from retaining arrests toward rear

Installation: Ensure that rear center section paneling (1) is seated correctly below left and right paneling (arrows).

6.1

Remove locking eye flap (3) from rear center section paneling (1).

Only when replacing rear center section paneling (1) or locking eye flap (3).

7

Install in the reverse order

Referenced documents