ar6830p4580mb

Remove/install and disassemble rear shelf

Type ar · topic 68.30 · version 0101 · 2012-12-12

Applies to: MODEL 220.175/176/178 with CODE Z07 (Top protection) For electrically actuated curtain at the rear window

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 220 (models 175, 176, 178)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 220 (models 175, 176, 178)

AR68.30-P-4580MB

Remove/install and disassemble rear shelf

9.11.12

MODEL

220.175/176/178

with CODE Z07 (Top protection)

For electrically actuated curtain at the rear window

Remove/install and disassemble rear shelf

P68.30-2511-09

1.1

Front of rear shelf

4

Bottom curtain rail

7

Locking pin

1.2

Rear of rear shelf

5

Plug-in clip

3

Bracket

6

Drive cable

Remove/install and disassemble rear shelf

8

Driver

9

Curtain stopper

P68.30-2512-04

Remove/install

1

Release rear seat backrest in upper area

AR91.12-P-1620M

Do not remove rear seat cushion.

2

Remove rear heat restraints

AR91.16-P-1770E

3

Remove trim from C-pillar

AR68.30-P-4490MC

4

Release plug-in clip (5) and remove

Pull rear seat backrest forward.

5

Remove front rear shelf (1.1) forward

6

Remove curtains out of drivers (8)

Identify installation position of curtains (wider side downward, pleats on inside).

Installation: Hook driver into second lug on curtains. Ensure that the curtains can be closed completely.

7

Remove curtain stopper (9) out of bottom curtain rail (4)

8

Pull rear part of rear shelf (1.2) forward a litte bit

Installation: Ensure that they are seated correctly in brackets (3).

9

Unthread curtain out of lower guide rail (4)

10

Separate connector (2)

11.1

Pull drive cable (6) out of bottom curtain rail (4)

Old version (A).

11.2

Detach cover cap (8) and pull out locking pin (7), pull back drive cable (6) slightly at the bend, pivot downward and pull out of the bottom curtain rail (4) at the side

New version (B).

Installation:Ensure that guide and locking pin (7) are seated correctly in curtain rail (4).

12

Remove rear part of rear shelf (1.2) forward

Installation:
Ensure that drive cables (6) on rear curtain are laid free of tension.
Otherwise damage cannot be prevented

Correct routing of drive cables (6) in brackets if necessary.

Installation: Ensure that rear shelf is seated correctly in brackets (3).

13

Detach bottom curtain rail (4) from rear part of rear shelf (1.2)

AR68.50-P-5600ML

Only if required.

14

Check mounts (3) of rear shelf, rework if necessary

AR68.30-P-4580-01MB

Only if required.

15

Install in the reverse order

Referenced documents