Prepare headliner for installation

AR68.30-P-4305-16FRX

Prepare headliner for installation

Notes on safety-relevant components

AH00.00-Z-0019-01A

Model

290

Repair materials

Number

Designation

Order number

BR00.45-Z-1144-02A

Adhesive tape roll, non-woven Tesa tape, 50 meters, 50 mm wide

A 008 989 50 85 09

Shown with code 414 (sliding sunroof), with code 811 (advanced sound system) and with code 97B (engine noise reduction using speakers)

1

Roof lining

E11/2

Right rear dome lamp

2

Sun visor mount

E14/1

Left sun visor mirror lamp

3

Electrical wiring harness

E14/2

Right sun visor mirror lamp

B25/20

Driver hands-free system microphone

H4/117

Left center rear center mid-range speaker (3D sound)

B25/21

Front passenger hands-free system microphone

H4/118

Right center rear center mid-range speaker (3D sound)

B25/30

Left rear active engine noise compensation microphone

H4/119

Center mid-range speaker at left center (3D sound)

B25/31

Right rear active engine noise compensation microphone

H4/120

Center mid-range speaker at right center (3D sound)

E11/1

Left rear dome lamp

1

Remove sun visor bracket (2) from old roof lining (1).

 Do not disconnect the electrical connectors.

2

Disconnect electrical connectors and remove sun visor mirror lamps (E14/1, E14/2) from old roof lining (1).

3

Disconnect electrical connectors and remove rear passenger compartment dome lamps (E11/1, E11/2) from old roof lining (1).

4

Disconnect electrical connectors and remove microphones for hands-free system (B25/20, B25/21) from old roof lining (1).

5

Model 290
with code 97B (Engine noise reduction via speakers)
Disconnect electrical connectors and remove microphones for rear passenger compartment active engine noise compensation (B25/30, B25/31) from old roof lining (1).

6

Model 290
with code 811 (Advanced sound system)
Disconnect electrical connectors and remove rear center mid-range speaker (3D sound) (H4/117, H4/118) from old roof lining (1).

7

Model 290
with code 811 (Advanced sound system)
Disconnect electrical connectors and remove center mid-range speaker (3D sound) (H4/119, H4/120) from old roof lining (1).

8

Expose electrical wiring harness (3) on old roof lining (1) and remove.

 Installation: Fasten electrical wiring harness (3) with adhesive tape.

 Observe routing of lines.

9

Install detachable parts on new roof lining (1) in reverse order.

10

Model 290
with code 460 (Canada version)
Model 290
with code 494 (US version)
Install new dampings on new roof lining (1).

 Use the installation locations and the number of dampings from the old roof lining (1).