Remove/install headliner

AR68.30-P-4300GR

Remove/install headliner

06.12.2018

Model

463.222/243/244/245/246/247/249/270/271/322/323/332/333/336/340/341

as of model year 2000 up to model year 2013

Model

463.236

as of model year 2010 up to model year 2013

except code 979 (Special protection MB Guard)

Model

463.237/346

as of model year 2010 up to model year 2013

Model

463.248

as of model year 2000 up to model year 2008

except code 979 (Special protection MB Guard)

1

Left sun visor

5

Bearing

9

Right A-pillar trim

2

Right sun visor

6

Cover

B25

Hands-free system microphone

3

Bolts

7

Inside rearview mirror

N70

Overhead control panel control unit

4

Bracket

8

Left A-pillar trim

24

Seat belt guide

A26/5

Interior motion sensor transmitter and receiver

10

Grab handle

22

Load protection net bracket

11

Covers

23

Screw

12

Inside rearview mirror bracket

15

Chrome-plated molding

19

Sheet metal clip

13

Bolts

16

Bolts

B38

Rain sensor

14

Electrical connector

17

Bolts

20

Bolts

18

Guide rails

Shown on model 463.248

19

Plate clamps

21

Headliner

 

Remove/install

1

Remove trim from tilting/sliding roof

AR77.20-P-0500G

 Only with code (D27) electric tilting/sliding roof

2

Fully open tilting/sliding roof

 Only with code (D27) electric tilting/sliding roof

3

Remove right front seat

Model 463.248
as of model year 2000 up to model year 2008
except code 979 (Special protection MB Guard)

AR91.10-P-3300GR

Model 463.222/244/247/322/332/336/340
as of model year 2000 up to model year 2013Wheelbase 2400 mm

AR91.10-P-1000GM

4

Remove rear seat and rear seat backrest

Model 463.222/243/244/245/246/247/249/270/271/322/323/332/333/336/340/341
as of model year 2000 up to model year 2013

AR91.12-P-1700G

 Remove right rear seat only.

5

Activate service mode in Telematic Alarm Identification on Demand (emergency call system) (TELE AID)

Model 463.243/244/245/322/323/332/333, 463.247/270 up to 4/1/07
as of model year 2000 up to model year 2013
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)
Model 463.248 up to 4/1/07
as of model year 2000 up to model year 2008
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)
except code 979 (Special protection MB Guard)

AR82.95-P-0005-03GR

Information on Tele Aid emergency call system

Model 463.243/244/245/322/323/332/333, 463.247/270 up to 4/1/07
as of model year 2000 up to model year 2008
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)
Model 463.248 up to 4/1/07
as of model year 2000 up to model year 2008
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)
except code 979 (Special protection MB Guard)

AH82.95-P-0001-01GA

 Danger

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

6

Disconnect battery ground line

Model 463.222/243/244/245/246/247/249/270/271/322/323/332/333/336/340/341
as of model year 2000 up to model year 2013
Model 463.236
as of model year 2010 up to model year 2013
except code 979 (Special protection MB Guard)
Model 463.237/346
as of model year 2010 up to model year 2013
Model 463.248
as of model year 2000 up to model year 2008
except code 979 (Special protection MB Guard)

AR54.10-P-0003G

Topical note

Notes on battery

AH54.10-P-0001-01A

7

Swivel left sun visor (1) and right sun visor (2) to the side and remove screws (3) from respective brackets (4)

8

Remove left sun visor (1) and right sun visor (2)

 Disconnect electrical connectors.

9

Remove bearing (5) of left sun visor (1) and right sun visor (2)

 The screw is located behind the cover (6), which can be folded down.

10

Remove overhead control panel control unit (N70)

AR82.20-P-1000GM

11

Remove inside rearview mirror (7)

AR68.40-P-0001GM

12

Disconnect electrical connector (14) at rain sensor (B38)

13

Remove inside rearview mirror bracket (12)

 Unscrew bolts (13).

14

Remove hands-free system microphone (B25) from roof lining (21)

 Disconnect electrical connection.

 Long wedge

*115589035900

15

Remove paneling on A-pillar

AR68.30-P-4050H

 Remove left A-pillar trim (8) and right A-pillar trim (9).

16

Remove paneling on B-pillar

Model 463.243/245/246/249/323/333 up to 5/31/04
as of model year 2000 up to model year 2013
Wheelbase 2850 mmModel 463.248 up to 5/31/04
as of model year 2000 up to model year 2008
except code 979 (Special protection MB Guard)Wheelbase 2850 mm

AR68.30-P-4700GN

Model 463.236
as of model year 2010 up to model year 2013
except code 979 (Special protection MB Guard)
/facelift 2012Model 463.237/346
as of model year 2010 up to model year 2013
/facelift 2012Model 463.243/245/246/249/323/333 as of 6/1/04, 463.270/271/341
as of model year 2000 up to model year 2013
Model 463.248 as of 6/1/04
as of model year 2000 up to model year 2008
except code 979 (Special protection MB Guard)

AR68.30-P-4700GY

 Remove left and right trims.

17

Remove rear trim from roof frame

AR68.30-P-4470GR

18

Remove seat belt guide (24) of center seat belt from roof lining (21)

 Only for models 463.243/245/246/248/249/
323/333 as of 1.06.04,
Models 463.222/236/237/270/271/336/340/
341/346

19

Remove grab handles (10)

 Push back covers (11) and remove screws.

20

Remove load protection net bracket (22)

 Remove screw (23).

21

Remove reading lamps in rear passenger compartment

AR82.20-P-1120GR

22

Remove interior protection transmitter and receiver unit (A26/5)

 Long wedge

*115589035900

23

Remove chrome molding (15)

 Only with code (D27) electric tilting/sliding roof

 The chrome molding (15) is attached with six screws (16).

24

Unscrew screws (17) from both guide rails (18)

 Only with code (D27) electric tilting/sliding roof

25

Remove guide rails (18) and covers located below

 Only with code (D27) electric tilting/sliding roof

 Installation: Coat left and right slide shoes with lubricating paste.

Synthetic grease, sliding roof 500 g, DB supply specification 6827.60

*BR00.45-Z-1004-06A

26

Carefully detach roof lining (21) from roof panel at adhesive points

 Only with code (D27) electric tilting/sliding roof

 Installation: Remove residual adhesive and rebond roof lining (21) at the intended points.

Adhesive Terokal 2444

*BR00.45-Z-1002-02A

27

Unhook roof lining (21) at tilting/sliding roof opening

 Only with code (D27) electric tilting/sliding roof

 To do so, unhook sheet metal clips (19).

28

Remove screws (20) of roof lining (21)

29

Disconnect velcro connections (arrows) between roof panel and roof lining (21)

 Secure roof lining (21) against falling down, e.g. with a second person.

30

Lower right roof lining (21) and remove diagonally through rear-end door opening

31

Install in the reverse order

32

Deactivate service mode in Telematic Alarm Identification on Demand

Activate/deactivate service mode in TELE AID emergency call system
Model 463.243/244/245/322/323/332/333, 463.247/270 up to 4/1/07
as of model year 2000 up to model year 2013
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)
Model 463.248 up to 4/1/07
as of model year 2000 up to model year 2008
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)
except code 979 (Special protection MB Guard)

AR82.95-P-0005-03GR

Information on Tele Aid emergency call system

Model 463.243/244/245/322/323/332/333, 463.247/270 up to 4/1/07
as of model year 2000 up to model year 2013
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)
Model 463.248 up to 4/1/07
as of model year 2000 up to model year 2008
with code ET2 (MB phone with integr. Tele Aid emergency call sys.)
except code 979 (Special protection MB Guard)

AH82.95-P-0001-01GA

 Only for models 463.243/244/245/250/309/
322/323/332/333 with code (ET2) Tele-Aid car telephone emergency call system,
463.247/248/254/270 up to 1.4.07
with code (ET2) Tele-Aid car telephone emergency call system

33

Read out fault memory and erase



AD00.00-P-2000-04A

 Stored faults which may be caused by removed cables or by a simulation, must be processed and erased in the fault memories after completing the work.

34

Perform function test of all removed component parts

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-02A

Adhesive Terokal 2444

A 000 989 92 71

BR00.45-Z-1004-06A

Synthetic grease, sliding roof 500 g, DB supply specification 6827.60

A 001 989 46 51