ar6830p4700gn
Remove/install paneling on B-pillar
Type ar · topic 68.30 · version 0108 · 2019-04-16
Applies to: Model 463.243/245/246/248/249/323/333 up to 5/31/04 up to model year 2013 Wheelbase 2850 mm
Where it sits
Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 463 (models 243, 245, 246, 248, 249, 323, 333)
EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 463 (models 243, 245, 246, 248, 249, 323, 333)
AR68.30-P-4700GN
| Remove/install paneling on B-pillar
| 27.03.2019
|
Model
| 463.243/245/246/248/249/323/333 up to 5/31/04
|
|
| up to model year 2013
|
|
| Wheelbase 2850 mm
|
3
| Belt end fitting screw/bolt
|
4
| Cover
|
5
| Nut, seat belt guide bracket
|
| Remove/install
|
|
|
1
| Remove door rubber seals (arrows) in area of B-pillar trim (1)
|
|
|
2
| Remove cover panel (2) and unscrew seat belt end fitting screw (3)
| Bolt on belt end fitting
| *BA91.40-P-1001-01C
|
|
|
| Torx bit set
| *000589011000
|
3
| Remove cover (4) and unscrew nut at seat belt guide bracket (5)
| Bolt/nut on front seat belt guide bracket
| *BA91.40-P-1002-01C
|
4
| Remove seat belt strap at B-pillar trim (1)
|
|
|
5
| Remove connector at rear seat heating switch
| Only with code H11.
|
|
6
| Remove B-pillar trim (1)
|
|
|
7
| Install in the reverse order
|
|
|
Seat belts/emergency tensioning retractors
|
Number
| Designation
|
| Model 463
up to model year 2019
|
BA91.40-P-1001-01C
| Bolt on belt end fitting
| Nm
| 35
|
Seat belts/emergency tensioning retractors
|
Number
| Designation
|
| Model 463
up to model year 2019
|
BA91.40-P-1002-01C
| Bolt/nut on front seat belt guide bracket
| Nm
| 35
|
