ar6830p4300ge

Removing and installing headliner

Type ar · topic 68.30 · version 0100 · 2001-01-19

Applies to: MODEL 168 as of 1.3.01 with CODE (417a) Louver sunroof

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 168

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.32 Roof lining — Series 168

AR68.30-P-4300GE

Removing and installing headliner

10.11.00

MODEL 168 as of 1.3.01 with CODE (417a) Louver sunroof

Removing and installing headliner

P68.30-2330-06

1 Headliner

2 Screw cover

3 Screws

4 Handle

5 Electrical connectors (rear dome lamp)

E15/3 Rear dome lamp

Removing and installing headliner

P68.30-2331-07

6 Edge guard

7 Front markings

8 Rear markings

9 Butt weld

Removing, installing

1

Open lamella roof

2

Disconnect battery

3

Remove front dome lamp

AR82.20-P-0110GC

4

Remove sun visor with left and right mounts

5

Remove all four handles (4)

For this purpose open screw covers (2) and unscrew screws (3).

6

Press lug (arrow) with suitable tool and remove rear dome lamp (E15/3)

7

Disconnect electric connectors (5) and remove rear dome lamp (E15/3)

8

Remove paneling from left and right A-pillars

AR68.30-P-4050GD

9

Remove paneling from left and right B-pillars

Only B-pillar paneling top section.

AR68.30-P-4700GC

10

Remove paneling from left and right C-pillars

Do not remove belt end fitting.

AR68.30-P-4490GD

11

Remove edge guard (6) from lamella roof

Installation: The front markings (7) should be positioned on top of one aonother.The butt joint (9) of the edge guard (6) should coincide with the rear markings (8).

12

Remove headliner (1)

13

Loosen cable holders (adhesive tape) from connection leads of front dome lamp

Installation: Replace adhesive straps if required.

14

Remove headliner (1) toward rear through tailgate

Ensure that headliner (1) is not kinked.

15

Install in the reverse order

Referenced documents