Removing and installing C-pillar paneling

AR68.30-P-4490GD

Removing and installing C-pillar paneling

15.11.00

 

Removing, installing

1

Remove luggage compartment cover

2

Remove rear roof frame paneling

AR68.30-P-4470GC

3

Remove gas pressure strut (2) from C-pillar

AR72.20-P-3600GC

4

Remove edge guard (3,4) from C-pillar in area of paneling (1)

5

Carefully press paneling (1) out of retaining clips (5) with assembly wedge and press off of clip (7)

 Move assembly wedge to clip (7) and lugs (6) as close as possible.

Installation: Check retaining clips (5) and clip (7), replace if necessary.



*110589035900

6

Remove paneling (1) from side paneling (9) (arrow) to center of vehicle.

Installation: Ensure that side paneling (9) is installed below C-pillar paneling (arrows).

7

Remove belt end fitting (8)



*BA91.40-P-1001-01E

8

Remove paneling (1)

Thereby move belt strap of seat belt through opening (10) in paneling (1).

9

Install in the reverse order

Number

Designation

Model 168

BA91.40-P-1001-01E

Belt end fitting screw

NM

35