ar6830p4300ff

Remove/install headliner

Type ar · topic 68.30 · version 0102 · 2005-01-26

Applies to: MODEL 454.0

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 454 (models 0**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.32 Roof lining — Series 454 (models 0**)

AR68.30-P-4300FF

Remove/install headliner

13.8.03

MODEL 454.0

Remove/install headliner

P68.30-2866-07

Shown on vehicles with code (V29) Electric glass sliding roof (FFO)

2 Headliner

1 Edge guard

Remove/Install

1

Remove paneling from A-pillar

AR68.30-P-4050FF

2

Remove sun visors

AR68.60-P-5480FF

3.1

Remove front overhead control panel

On vehicles with code (C27) Telephone preparation including mount and antenna (DFO/FFO) or with code (V29) Electric glass sliding roof (FFO)

AR82.20-P-1100FF

3.2

Remove front dome lamp

On vehicles without code (C27) Telephone preparation including mount and antenna (DFO/FFO) or without code (V29) Electric glass sliding roof (FFO)

AR82.20-P-0110FF

4

Remove handle from roof

AR68.30-P-4330FF

5

Remove head restraints from front seats

6

Remove paneling from B-pillars

AR68.30-P-4700FF

7

Remove paneling from upper C-pillars

AR68.30-P-4490FF

8

Remove rear dome lamp

AR82.20-P-0113FF

9

Remove clips (arrows) from headliner (2)

10

Loosen door seal in area of headliner (2) on all doors and on tailgate

11.1

Remove headliner (2) from roof paneling in area of grab handles

Only on vehicles with code (E55) Glass roof with sun protection (FFO)

Installation: Ensure that headliner (2) is seated properly.

12.1

Remove edge guard (1) for headliner (2) in area of glass sliding roof

Only on vehicles with code (V29) Electric glass sliding roof (FFO)

13

Remove headliner (2) over trunk diagonal toward rear through rear-end door

Remove headliner (2) carefully because strong deformation can lead to damage.

14

Install in the reverse order

Referenced documents