Remove/install door sill molding

AR68.30-P-4100SR

Remove/install door sill molding

04.08.2014

MODEL

453.0

1

Lining on B-pillar

2

Screw

3

Front seat belt

4

Door sill

5

Rear seat belt

6

Paneling on lower C-pillar

7

Screw

8

Screw

 

Remove/install

1

Remove paneling on B-pillar (1)

AR68.30-P-4700SR

2

Unscrew bolt (8) and lay rear seat belt (5) down to side

MODEL 453.0

 Screw/bolt, belt end fitting to C-pillar

*BA91.40-P-1010-01SR

3

Detach paneling on lower C-pillar (6)

4

Unscrew bolt (7) below paneling on lower C-pillar (6)

5

Unscrew bolt (2) from end fitting and lay seat belt (3) down to side

 Installation: Ensure that seat belt (3) is routed correctly.

 Screw/bolt, belt end fitting to B-pillar

*BA91.40-P-1004-01SR

6

Unclip door sill (4) from front toward rear using suitable tool


Carefully unclip door sill (4).
Otherwise damage can be caused by breakage and scratches.

7

Remove door sill molding (4)

8

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

MODEL 453.0

BA91.40-P-1004-01SR

Screw/bolt, belt end fitting to B-pillar

Nm

21

 Seat belts/emergency tensioning retractors

Number

Designation

MODEL 453.0

BA91.40-P-1010-01SR

Screw/bolt, belt end fitting to C-pillar

Nm

21