ar6830p4700src

Remove/install paneling on B-pillar

Type ar · topic 68.30 · version 0100 · 2016-01-12

Applies to: Model 453.4

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 453 (models 4**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 453 (models 4**)

AR68.30-P-4700SRC

Remove/install paneling on B-pillar

16.12.15

Model

453.4

Remove/install paneling on B-pillar

P68.30-3875-08

Shown with CODE 810 (Sound system)

1

Retaining clip

3

Luggage compartment lamp

5

Cover

2

Screw

4

Cover

6

Edge guard

Remove/install paneling on B-pillar

P68.30-3879-08

7

Bolts

8

Cover

8.1

Catch

Remove/install

1

Remove paneling from rollover bar

AR68.30-P-1380SRC

2

Remove side support

3

Close rear soft top and fold up clamping bracket (1)

4

Remove cover (5)

AR68.30-P-4800SRC

5

Remove edge guard (6) up to top edge of B-pillar

6

Remove belt end fitting

Bolt, belt end fitting to B-pillar

*BA91.40-P-1004-01SR

7

Unscrew bolt (2)

8

Unclip paneling (4)

9

Disconnect electrical connector from trunk lamp (3)

When removing paneling (4) on left side of vehicle.

10

Guide seat belt through paneling (4) and remove paneling (4)

11

Remove bolts (7)

12

Detach catch (8.1) out of body and remove paneling (8)


Carefully detach catch (8.1).
Otherwise the catch (8.1) can be damaged.

13

Install in the reverse order

Seat belts/emergency tensioning retractors

Number

Designation

Model 453.4

BA91.40-P-1004-01SR

Bolt, belt end fitting to B-pillar

Nm

21

Referenced documents