Shown on left side of vehicle with code 224 (Design individual rear seat system) |
1 | Trim strip |
2 | Screw |
3 | Trim strip |
4 | Stowage compartment cover |
5 | Screw |
6 | Screw |
7 | Trim strip |
P68.30-A060-06
| Remove/install | ||
1 | Remove C-pillar trim. | ||
2 | Adjust seat backrests in the rear passenger compartment to the foremost position. | ||
3 | Unclip trim strip (1), disconnect the electrical connector for the ambient lighting, and remove trim strip (1). | Long wedge | |
4 | Remove screw (2). | ||
5 | Unclip trim strip (3), disconnect the electrical connector for the ambient lighting, and remove trim strip (3). | Long wedge | |
6.1 | Fold down the stowage compartment cover (4). | Model 167.9 | |
6.2 | Fold down the armrest. | Model 167.9 | |
7 | Remove screw (5). | Model 167.9 | |
8 | Remove screw (6). | Model 167.9 | |
9 | Remove the seat belt end fitting of the lap belt in the rear passenger compartment. | Model 167.9 | |
10 | Unclip trim strip (7), disconnect the electrical connector for the ambient lighting, and remove trim strip (7). | Model 167.9 | |
Long wedge | |||
11 | Install in the reverse order. |
115 589 03 59 00
Long wedge
Referenced documents
- ar6830p4490mex Remove/install trim at C-pillar
- ar9140p0683mem Remove, replace and install rear center seat belt