ar6830p1403h

Remove/install pocket on partition wall

Type ar · topic 68.30 · version 0102 · 2019-03-25

Applies to: Model 240.1 with code 215 (Partition) Model 240.1 with code 302 (Partition screen with clear glass) Model 240.1 with code 303 (Partition with clear window and curtain)

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 240 (models 1**)

EinPAS 37 Interior equipment › 37.65 Partition wall/wire mesh partition › 37.65.35 Partition wall/wire mesh partition — Series 240 (models 1**)

AR68.30-P-1403H

Remove/install pocket on partition wall

08.03.2019

Model

240.1

with code 215 (Partition)

Model

240.1

with code 302 (Partition screen with clear glass)

Model

240.1

with code 303 (Partition with clear window and curtain)

Remove/install pocket on partition wall

P68.30-2757-08

1

Folding bag

3

Nuts

A40/5

Left rear display

2

Upper partition wall panel

4

Supporting strip

A40/6

Right rear display

Remove/install

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

1

Remove upper partition trim (2) at rear at partition

AR68.30-P-1402HA

2

Set down upper partition trim (2) with front side on a suitable clean base


Carefully handle upper partition trim (2),
as left rear display (A40/5) and/or right rear display (A40/6) can otherwise be damaged.

3

Unscrew nuts (3)

Installation: Carefully tighten nuts (3).

4

Remove supporting strip (4)

5

Turn around upper partition trim (2) and remove folding bag (1) from upper partition trim (2)


Carefully turn around upper partition trim (2),
as left rear display (A40/5) and/or right rear display (A40/6) can otherwise be damaged.

6

Install in the reverse order

Referenced documents