ar6830p1402ha

Remove/install rear paneling on partition wall

Type ar · topic 68.30 · version 0102 · 2019-03-25

Applies to: Model 240.1 with code 215 (Partition) Upper partition wall panel Model 240.1 with code 302 (Partition screen with clear glass) Upper partition wall panel Model 240.1 with code 303 (Partition with clear window and curtain) Upper partition wall panel

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 240 (models 1**)

EinPAS 37 Interior equipment › 37.65 Partition wall/wire mesh partition › 37.65.35 Partition wall/wire mesh partition — Series 240 (models 1**)

AR68.30-P-1402HA

Remove/install rear paneling on partition wall

08.03.2019

Model

240.1

with code 215 (Partition)

Upper partition wall panel

Model

240.1

with code 302 (Partition screen with clear glass)

Upper partition wall panel

Model

240.1

with code 303 (Partition with clear window and curtain)

Upper partition wall panel

Remove/install rear paneling on partition wall

P68.30-2751-09

Front view of partition

2

Bolts

3

Electrical connectors

Remove/install rear paneling on partition wall

Rear view of partition

1

Upper partition wall panel

4

Bolts

5

Edge guard

6

Retaining clips

A40/5

Left rear display

A40/6

Right rear display

P68.30-2752-06

Remove/install

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

1

Fully close partition window

See owner's manual.

2

Remove front trim from partition

AR68.30-P-1401HA

Upper trim.

3

Remove screws (2)

4

Disconnect electrical connector (3) and concealed electrical connector (arrow)

5

Remove rear partition center console

AR68.20-P-2351H

6

Remove lower trim at rear at partition

AR68.30-P-1402H

7

Remove left and right door sill

AR68.30-P-4100HB

Rear door sill.

8

Remove bolt s (4)

9

Remove edge guard (5) at left and right B-pillar until retaining clips (6) can be accessed

10

Remove retaining clips (6) from left and right B-pillar

11

Remove upper partition trim (1) with aid of second technician upwards from partition and remove from vehicle


Carefully handle upper partition trim (1),
left rear display (A40/5) and right rear display (A40/6) and/or upper partition trim (1) can otherwise be damaged.

Installation: Upper partition trim (1) is guided in upper area in 4 retaining tabs that are located on partition. During installation, ensure that upper partition trim (1) is attached in retaining tabs.

12

Install in the reverse order

Referenced documents