ar6830g4750e

Remove/install rear wall paneling

Type ar · topic 68.30 · version 0200 · 2008-04-04

Applies to: MODEL 405.050 with BODY 979.820

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 405 (models 050) · Series 979 (models 820)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 405 (models 050) · Series 979 (models 820)

AR68.30-G-4750E

Remove/install rear wall paneling

4.4.08

MODEL 405.050 with BODY 979.820

Remove/install rear wall paneling

G68.30-3116-09

1 Rear wall paneling

2 Rivets

3 Luggage net

4 Bearing sleeve

5 Screw

6 Cover

7 Seat belt

Modification notes

4.4.08

Value modified: Bolt, belt anchor to cab rear panel

*BA91.40-N-1006-01C

Remove/install

1

Remove paneling from both B-pillars

AR68.30-G-4700E

2

Remove passenger seat

AR91.10-G-1020E

3

Completely move driver sat toward front

4

Tilt driver seat backrest toward front

5

Remove luggage net (3)

6

Remove cover (6)

7

Remove bolt (5) and remove seat belt (7)

*BA91.40-N-1006-01C

8

Remove rivets (2)

9

Pull out rear wall paneling (1) in area of headliner

10

Remove rear wall paneling (1)

Slightly lift center console and pull out rear wall paneling (1).

11

Pull seat belt (7) out of rear wall paneling (1)

12

Remove rear wall covering (1)

13

Install in the reverse order

Seat belts/emergency tensioning retractors

Number

Designation

Body
979.820
in model
405.05

BA91.40-N-1006-01C

Bolt, belt anchor to cab rear panel

Nm

40

Referenced documents