ar6830d4490tsa

Remove/install trim at C-pillar

Type ar · topic 68.30 · version 0100 · 2019-02-27

Applies to: Model 907.2

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 907 (models 2**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 907 (models 2**)

AR68.30-D-4490TSA

Remove/install trim at C-pillar

12.02.2019

Model

907.2

Remove/install trim at C-pillar

Shown on model 907.2 with code F35 (cab rear panel with window) and except code S92 (crewcab seating passenger compartment eliminated) on the right side of the vehicle

1

C-pillar paneling

2

Cover

3

Screw

4

Coat hook

5

Belt sash guide

D68.30-A008-76

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Release rear bench seat, tilt forward, and secure against tilting back.

Model 907.2
except code S92 (Deletion seats passenger comp. if double cab)

AR91.12-D-4025TS

2

Remove cover (2).

3

Remove screw (3) and remove clothes hooks (4).

4

Remove belt sash guide (5) from the C-pillar and secure to one side with seat belt.

Model 907.2
except code S92 (Deletion seats passenger comp. if double cab)

AR91.40-D-0005TS

5

Release C-pillar trim (1) from the C-pillar and remove.

Ensure that the C-pillar trim (1) is seated correctly on the rear panel trims and on the frame seal of the rear door.

6

Install in the reverse order

Referenced documents