ar6830d4300ch

Remove/install headliner

Type ar · topic 68.30 · version 0103 · 2015-05-27

Applies to: Model 900

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 900

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.32 Roof lining — Series 900

AR68.30-D-4300CH

Remove/install headliner

13.5.15

Model

900

Remove/install headliner

D68.30-2439-09

1

Inner headliner

4

Bolts

7

Front side headliner

2

Light strip cover

5

Inner mounting rail

8

Center side headliner

3

Screw

6

Side mounting rail

Remove/install headliner

D68.30-2442-08

5

Inner mounting rail

7

Front side headliner

16

Bolts

6

Side mounting rail

11

Long wedge

Remove/install headliner

D68.30-2438-09

5

Inner mounting rail

11

Long wedge

14

Air shaft cover

6

Side mounting rail

12

Electrical connector

15

Screw

9

Rear side headliner

13

Bolts

Remove/install headliner

D68.30-2441-08

1

Inner headliner

9

Rear side headliner

8

Center side headliner

14

Air shaft cover

Remove/install headliner

D68.30-2440-08

1

Inner headliner

10

Bolts

17

Screw

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove light strip cover (2) on left and right


Carefully remove light strip cover (2).
Otherwise the light strip cover (2) can be damaged.

Slightly press light strip cover (2) together and remove downward.

Installation: Hook in light strip cover (2) from outside, press together and arrest in side retaining rails (6) and inner retaining rails (5).

2

Unscrew bolt (3) from cutout for roof hatch

3

Unscrew bolts (4) and remove vent grille

4

Unscrew bolts (16) from both side retaining rails (6)

5

Unclip side mounting rail (6) from inner mounting rails (5) with long wedge (11)

Long wedge

*115589035900

6

Pivot side mounting rail (6) 90° downward and remove from inner mounting rail (5)

Helper required.
Slightly pull headliner toward at front downward.

7

Disconnect electrical connector (12) from left and right light strip

8

Remove bolts (13)

9

Pivot air duct cover (14) on left and right downward and remove


Carefully remove air duct covers (14).
Otherwise the air duct covers (14) can be damaged.

10

Remove bolts (15)

11

Remove rear side headliner (9) center side headliner (8) and front side headliner (7)

Installation: Check adhesive foils on rear of front side headliner (7), center side headliner (8) and rear side headliner (9) for damage, replace if necessary.

Long wedge

*115589035900

12

Remove bolts (17)

13

Unscrew bolts (10) from inner mounting rails (5)

Two helpers required for securing inner headliner (1).

14

Guide inner headliner (1) completely out of vehicle

Two helpers required.

15

Install in the reverse order

Remove/install headliner

115 589 03 59 00

Long wedge

Referenced documents