Remove/install A-pillar trim

AR68.30-D-4051TS

Remove/install A-pillar trim

21.11.2017

Model

907, 910

Shown on model 910 on the driver's side with code SH9 (window airbag for driver and front passenger)

1

A-pillar trim panel

3

Screw

2

Cover

4

Fasteners

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2 m)

2

Detach sealing frame along A-pillar trim (1)

3

Unclip cover (2) from A-pillar trim (1)

Model 907, 910
with code SH9 (Windowbag for driver and co-driver)

 Clip remover

*452589016300

4

Unscrew screw/bolt (3)

Model 907, 910
with code SH9 (Windowbag for driver and co-driver)

5.1

Detach A-pillar trim (1) in top area from A-pillar and unclip in the center area (arrows A) from A-pillar

Model 907, 910
with code SH9 (Windowbag for driver and co-driver)

 Installation: Ensure correct bedding in of the fasteners (4) in the A-pillar.

 Clip remover

*452589016300

5.2

Unclip A-pillar trim from the A-pillar starting at the top

Model 907, 910
except code SH9 (Windowbag for driver and co-driver)

 Clip remover

*452589016300

6

Remove A-pillar trim (1)

 Installation: Insert A-pillar trim (1) first into guides (arrows B) on the instrument panel.

7

Install in the reverse order