Shown with remove cover for vehicle tool kit |
1 | Edge guard |
2 | Paneling below air vent |
3 | Spreading anchor |
4 | Screw |
5 | Cover on entry |
6 | Floor covering on passenger side |
7 | Screw |
8 | Cover |
D68.30-2463-06
| Remove/install | ||
1 | Remove cover of vehicle tool kit | ||
2 | Loose edge guard (1) in area of paneling (8) | Installation: Ensure that the edge guard (1) is properly seated. | |
3 | Remove paneling below air vent (2) | ||
4 | Unscrew bolt (4) on cover from entry (5) | ||
5 | Remove expansion anchors (3) | ||
6 | Fold back passenger side floor covering (6) | ||
7 | Unscrew bolt (7) | ||
8 | Remove paneling (8) | ||
9 | Install in the reverse order |