Remove/install side wall lining

AR68.30-D-1450M

Remove/install side wall lining

29.09.2016

Model

906.6

with code V21 (Interior panelling luxury)

except code PE4 (DCAA bus master code, Argen)

except code PE5 (Mastercode, bus seats on raised base, Argen)

except code ZO1 (Camper James Cook Compact)

except code ZO2 (Camper James Cook Classic)

Model

906.7

Shown on model 906.7 with code EL9 (Two-way speaker system, front and rear) and with code W54 (Two-wing rear-end door, 270 degrees) on right side paneling (1)

1

Side wall lining

5

Tweeter

2

2-way speaker

6

Bolts

3

Electrical connectors

7

Bracket

4

Stowage compartment

Shown on removed right side paneling (1) on model 906.7 with code EL9 (Two-way speaker system, front and rear) and with code W54 (Two-wing rear-end door, 270 degrees)

1

Side wall lining

4

Stowage compartment

2

2-way speaker

8

Mounting clip



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove left and right paneling on corner pillar

Model 906.6 with code V21 (Superior interior trim), model 906.7

AR68.30-D-4505A

2

Remove bolts (6)

MODEL 906.6/7 with CODE W54 (Rear-end door, double wing, 270 degrees)

3

Unscrew bracket (7) from magnetic end stop

MODEL 906.6/7 with CODE W54 (Rear-end door, double wing, 270 degrees)

If the bracket (7) cannot be unscrewed.



Remove magnetic end stop from rear-end door

4

Remove tweeter (5)

Model 906.7
with code EL9 (Two-way loudspeaker system in front and rear)

AR82.62-D-0007M

5

Loosen all retaining clips (8) and remove side wall paneling (1)

Model 906.6, model 906.7 except code EL9 (Two-way speaker system, front and rear)

 Clip remover

*452589016300

6

Loosen all retaining clips (8) and remove side wall paneling (1) until electrical connectors (3) are accessible on 2-way-speaker (2)

Model 906.7
with code EL9 (Two-way loudspeaker system in front and rear)

7

Detach electrical connections (3)

Model 906.7
with code EL9 (Two-way loudspeaker system in front and rear)

 Observe assembly position of corresponding electrical connector (3).

8

Remove 2-way speaker (2) from side wall paneling (1)

Model 906.7
with code EL9 (Two-way loudspeaker system in front and rear)
If side wall paneling (1) or two-way speaker (2) are replaced.

AR82.62-D-0006M

9

Unclip cover from tweeter (5)

Model 906.7
with code EL9 (Two-way loudspeaker system in front and rear)
If side wall paneling (1) is replaced.

10

Remove stowage compartment (4)

Model 906.7
If side wall paneling (1) is replaced.



Check

11

Check all retaining clips (8) for damage

for damage



Replace respective retaining clip (8)

12

Install in the reverse order



Check

13

Check 2-way speaker (2) and tweeter (5) for proper function

Model 906.7
with code EL9 (Two-way loudspeaker system in front and rear)