Remove/install trim on sliding door entrance box

AR68.30-D-0018A

Remove/install trim on sliding door entrance box

19.02.2019

Model

906.6/7

with code D50 (Full-length partition)

Model

906.6/7

with code D51 (Entire partition with 1 window)

Model

906.6/7

with code D53 (Full-length partition with 1 sliding window)

Shown on model 906.6 with code LB9 (illuminated exits), code D51 (full-width partition wall with 1 window), and code V43 (wooden floor)

1

Cover

3

Electrical connector

4

Exit light

2

Bolts

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Completely open sliding door.

2

Unclip exit lamp (4), disconnect electrical connector (3), and remove exit lamp (4).

Model 906.6/7 with code LB9 (Illuminated exits)

 Clip remover

*452589016300

3

Unscrew bolts (2).

 The number of screws may vary depending on the equipment variant (2).

4

Release trim (1) in the top area.

5

Lift trim (1) and remove.

 Depending on the equipment variant, the trim (1) and the guides (arrows) may deviate from what is shown.

 Installation: Insert guides (arrows).
Ensure that the guides (arrows) are seated correctly.

6

Install in the reverse order



Check

7

Perform function check of exit lamp (4).

Model 906.6/7 with code LB9 (Illuminated exits)