ar6830b4750d

Remove/install rear wall paneling

Type ar · topic 68.30 · version 0100 · 2016-02-12

Applies to: Body 693.8 with Vehicle 693

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 693

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 693

AR68.30-B-4750D

Remove/install rear wall paneling

12.02.16

Body 693.8 with Vehicle 693

Remove/install rear wall paneling

B68.30-0023-09

Remove/install rear wall paneling

B68.30-0024-06

1 Rear wall lining

2 Electric connections on switches console

3 Hex head bolts

4 Plastic rivets with expansive bushings

5 Reading light lamp housing

6 Reading light lamp lens

7 Cover grill

8 Switches console

Remove and install

1

Remove the mattress from the bottom bunk and the parcel-holder boxes

AR91.75-B-7700A

2

Remove the lining of the right and left side walls

AR68.30-B-1450B

3

Remove the plastic rivets and the expansive bushings (4)

4

Remove the rear wall lining (1)

Move the rear wall lining ahead and disconnect the electric connections (2) from the switches and from the reading light lamp.

Installing: Initially, screw-on the hex head bolts (3) without tightening. Only tighten the bolts after installing and accommodating the bunk mattress.

5

Separate the rear wall lining, the switches console (8), the housing and the lens of the reading light lamp (5) and, ventilation diffusers (7)

Separate and remove the components only if replacing the rear wall lining.

6

Install in reverse order

Referenced documents