AR67.20-T-5145A | Remove/install rear window | 15.11.11 |
MODEL 671.000 /005 /010 /322 /327
with rear window in rubber frame
T67.20-0001-11
1 Rear window
2 Rubber frame
Danger! | Risk of injury caused by hands or feet being pinched or crushed when working on windshield or windows | Secure windows to prevent them from falling, use only the prescribed lifting tools, always wear safety shoes. | |
| Removing | ||
1 | Remove display in rear | ||
2 | Cut rubber frame (2) on rear window (1) all the way around from outside | ||
3 | Press out rear window (1) from inside to outside | Place vehicle on working platform. When pressing out, start at top. Counterhold from outside. Do not detach rear window on one side only or with force. Risk of accident from glass breakage. If applicable, cut sealing adhesive at window wedge. | |
4 | Remove rear window (1) from cab with cup suction tool | When reusing rear window, put down on padded base. Otherwise dispose of rear window ecologically. | |
Cup suction tool/shackle (for removing and installing windows) gotis://K_67.0_03.0 | |||
| Install | ||
5 | Prepare rear window (1) for installation | Mark center of rubber frame in relation to center of rear window and align. | |
6 | Prepare rear window cutout for installation | Repair paint damage on contact surface of window opening. Clean contact surface of window opening and coat window opening with lubricant. | |
7 | Move rear window (1) to working platform on vehicle and put down on padded base | Cup suction tool/shackle (for removing and installing windows) gotis://K_67.0_03.0 | |
8 | Position rear window (1) in window opening, center at side and press on so that rubber frame (2) is flush all the way around. | ||
9 | Pull sealing lip of rubber frame (2) over outer edge of window opening with hook | Simultaneously press on rear window (1) from outside. Pull sealing lip of rubber frame over edge of window opening first from inside then from outside. | |
| |||
10 | Check whether retaining lip is seated correctly, if applicable correct with hook. | ||
| |||
11 | Knock rubber frame (1) all the way around with rubber hammer in direction of contact surface | Do not damage rear window. | |
12 | Apply sealant into sealing lip of rubber frame all the way around. | | |
| |||
13 | Remove escaping sealant. | ||
14 | Clean rear window and check for leakage | ||
15 | Install rear display panel |
Hand pressure gun
000 589 01 25 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1023-01A | Sealing adhesive | A 003 989 38 71 |
BR00.45-Z-1032-06A | Antifriction agent | A 000 989 08 60 |
Referenced documents
- ar6710t150102a Prepare windshield for glazing
- as6700z000301a Risk of injury from pinching or crushing hands and feet when working on windows.
- wf5850n671002b Windshield peripheral seal assembly hook