W63.10-0003-09
W63.10-0001-03
W63.10-0002-03
Danger! | The high voltage used for arc welding presents a lethal hazard. Explosion hazard when welding in the area of highly combustible materials. Injury hazard from welding spatter and UV light while welding. Welding gases are poisonous when inhaled. | Use insulating mats. | |
| Measures for preventing damage to vehicles or components when performing arc welding work | All models | |
| General notes on body repair | All models | |
1 | Determine separation points | ||
2 | Remove damaged components | Cut (A) partial replacement at edge of door flange:Separate damaged component at the 1st edge of door flange. | |
3 | Install outer skin parts | Installation (B) partial replacement at edge of door flange: Allow new part to overlap by the amount of the width of flange. |
Referenced documents
- ah0000n000501a Measures for preventing damage to vehicles or components when performing electric welding work
- ah6000n000101a General information on body repair
- ar6000w575001a Determining separation points
- ar6000w575002a Removing damaged components
- ar6000w575003a Installing outer skin parts
- as0000z000701a The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from