Commercially available tools
Number | Designation | |
WH58.30-Z-1002-02A | Hole punching pliers, dia. 7 mm | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
W63.10-1017-06
1 Punch holes for plug welding in area A .
2 Drill holes for plug welding in areas B and C.
3 Grind connection surfaces in areas A to C down to bare metal on both sides.
4 Grind spot welding flange in shaded areas down to bare metal on both sides. Coat insides of spot weld flanges with zinc dust paint.
W63.10-1018-06
5 Punch holes for plug welding in area M .
6 Grind connection surfaces in areas D to J and L down to bare metal on one side.
7 Grind connection surfaces in areas K and M down to bare metal on both sides.
8 Grind spot welding flange down to bare metal in shaded area on both sides. Coat inside of spot welding flange with zinc dust paint.
W63.10-1043-06
9 Punch holes for plug welding in area N.
10 Drill holes for plug welding in areas O to Q
11 Grind connection surfaces in areas N to Q down to bare metal on both sides.
12 Grind connection surface in area R and S down to bare metal on one side.
13 Grind spot welding flange in shaded areas down to bare metal on both sides. Coat insides of spot weld flanges with zinc dust paint.
W63.10-1042-01
14 Grind connection surfaces in areas T and U down to bare metal on both sides.
15 Grind connection surfaces in areas V and W down to bare metal on one side.
W63.10-1041-09
16 Separate floor panel along dotted line with body saw
Mark cuts of floor panel according to separated floor panel
17 Punch holes for plug welding in areas X to Z.
18 Drill holes for plug welding in areas AA to AD.
19 Grind connection surfaces in areas X to Z and AA to AD down to bare metal on both sides.
20 Grind connection surfaces in areas AE and AF down to bare metal on one side.
21 Grind spot welding flange in shaded areas down to bare metal on both sides. Coat insides of spot weld flanges with zinc dust paint.
W63.10-1040-01
22 Grind connection surfaces in areas AG and AH down to bare metal on both sides.