Remove/install detachable parts on right rear-end door for repairing body/painting

AR60.00-D-0010TS

Remove/install detachable parts on right rear-end door for repairing body/painting

15.11.2018

Model

907.6/7, 910.6

Shown on model 907 with code D03 (Roof and rear-end doors, high version)

1

Rear-end door

3

Rear window

4

Door trim

5

Mercedes star

6

Guide bearing

7

Rotary tumbler

8

Rotary tumbler with door lock

9

Bellows

10

Bolts

11

Bolts

 

Remove/install

1

Remove bearing bracket at rear-end door (1).

AR72.20-D-4013TS

2

Remove door trims (4).

Model 907.6/7
with code VA5 (Fully lined hinged rear doors)

AR72.20-D-6616TS

Model 907.6/7
except code VA5 (Fully lined hinged rear doors)
Model 910.6

AR72.20-D-6619TS

3

Remove Mercedes star (5).

 For this purpose, remove screws (10).

4

Remove model plate using suitable tool.

If installed.

5

Remove guide bearing (6).

 Screw, guide bearing to rear-end door

*BA72.20-N-1008-01TS

6

Remove rotary tumbler (7) for lock striker.

 Removal: Mark positions of screws (11).

 Installation: Observe markings of screws (11).

 Screw, rotary tumbler to top of rear-end door

*BA72.20-N-1001-01TS

7

Remove rotary tumbler with door lock (8).

AR72.20-D-4055TS

 Do not disconnect electrical connector and cables from door lock.

8

Remove rear window (3).

Model 907.6/7, 910.6 with a window in rear-end door and with heated rear window

AR67.20-D-5145TS

Model 907.6/7, 910.6 with a window in rear-end door without heated rear window

AR67.20-D-5145TSB

9

Remove boot (9) from rear-end door (1).

10

Install in the reverse order.

 Rear-end door

Number

Designation

Model 907.6/7, 910.6

BA72.20-N-1001-01TS

Screw, rotary tumbler to top of rear-end door

Nm

13

 Rear-end door

Number

Designation

Model 907.6/7, 910.6

BA72.20-N-1008-01TS

Screw, guide bearing to rear-end door

Nm

9