AR55.50-T-0300A | Removing and installing hydraulic cylinder | 23.11.98 |
MODEL NMB671.312 /322 /327 /332 /333
T55.50-0005-12
1 Hydraulic cylinder
2 Hydraulic line
3 Hydraulic line
4 Pin
5 Bolt
6 Washer
7 Nut
T55.50-0043-11
8 Control block
9 Ball valve
11 Bleed valve
| Removing | ||
Danger! | Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning from swallowing hydraulic fluid. | Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses. | |
1 | Park vehicle in straight-ahead position over a pit | ||
2 | Open bellows at front section end and rear section end at the bottom | Do not open the cable locks on the bellows. | |
3 | Close ball valve (9) | ||
4 | Release pressure in hydraulic system | Release the pressure via the bleed valve (11) on the control block (8). Collect escaping hydraulic fluid in a suitable container. | |
5 | Detach hydraulic lines (2) from hydraulic cylinders (1) | Mark hydraulic lines (2) relative to the hydraulic cylinders (1). | |
6 | Remove hydraulic lines (3) | Mark connections of hydraulic lines (3) relative to the hydraulic cylinders (1). | |
7 | Unscrew nut (7) | Counter the bolt (5) if necessary. | |
8 | Remove washer (6) | ||
9 | Unscrew bolt (5) | | |
10 | Remove pin (4) | ||
11 | Remove hydraulic cylinder (1) | ||
| Installing | ||
12 | Install hydraulic cylinder (1) | ||
13 | Install pin (4) | ||
14 | Screw in bolt (5) | | |
15 | Install washer (6) | ||
16 | Screw on nut (7) | Counter the bolt (5) if necessary. | |
17 | Install hydraulic lines (3) | Observe markings. | |
18 | Connect hydraulic lines (2) | Observe markings. | |
19 | Open ball valve (9) | ||
20 | Close bellows at front and rear section ends at the bottom | ||
21 | Bleed hydraulic cylinder |
Articulation system
Referenced documents
- ar5550t0310a Bleeding hydraulic cylinder
- ar5550t0600a Removing and installing bellows
- as0000z001301a Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.