B55.50-0002-02
Vehicle 382.154 with HÜBNER articulation
A Tightening sequence
1 Spring pin
2 Screw
B55.50-0003-01
2A Screw
3 Screw
4 Washers
4A Nut
5 Sleeve
6 Nut
7 Cover
| Removing and installing | ||
1 | Park the vehicle on a flat place | ||
2 | Remove the platform from the articulation system | ||
Danger! | Risk of accidents due to vehicle moving when the engine is started. Risk of injuries by pinching or suffer burns when working while the engine started or when the vehicle is moving | Assure vehicle against unintentional move. Utilize tight fitting and closed work clothes. Do not touch heated or running parts. | |
3 | Support the rear car and the front car with blocks and/or hydraulic device | Utilize a suitable block and support correctly do prevent damage | |
4 | Move away the bellows | Installing: Move away the center side bellows and secure with a fastening strap to the front unit and to rear unit. | |
5 | Disconnect the electric whip from the hydraulic cylinder | ||
Danger! | Risk of injury in the eyes from hydraulic steering fluid jets, at high pressure. Poisoning risk by swallowing hydraulic steering fluid | Slacken the end of stroke bolt, maximum 5 turns. Wear safety goggles. | |
6 | Remove the hydraulic steering flexible pipes from the front and rear unit | Plug the flexible pipe end openings fastened to the front and rear unit. Catch the hydraulic fluid in a suitable container. | |
Danger! | Life at risk by the lowering of the vehicle when working between the wheels and the structure. Risk of injury by crushing or pressing, in pneumatic suspension jobs | Do not work between the wheels and the rolling space or wheel wells. Carry out the testing jobs and adjustment exclusively from the vehicle underside and with the help of a pit. Safely fence access to moving parts area. | |
7 | Install a suitable lifting device | Utilize a lifting device with more than 800 kg capacity for lifting and transportation. | |
8 | Unscrew the bolts (2) together with the spring pins (1) from the underside at the rear structure | Installing: Follow the tightening sequence indicated in figure (A) of the 24 bolts. | |
| |||
9 | Unscrew the 4 bolts (2a) and/or bolts (3) together with the sleeves (5) in the front structure from the top side | | |
10 | Remove the articulation | ||
11 | Install in reverse order | Align the front car and the rear car with 2m distance. |
Steering system
Referenced documents
- ar5550b0120a Remove/install articulation system platform
- ar5550b0600a Removing and installing bellows
- as0000b000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as3222b000101a Risk of death from lowering vehicle when working between wheels and body. Risk of injury from pinching or crushing when working on the air suspension.
- as4600b000101a Danger of injury to eyes caused by steering oil emerging at high pressure. Danger of poisoning caused by swallowing steering oil