W54.30-1225-11
Front view of the conjugated instrument INS 2000
P4 Conjugated instrument INS 2000
W54.30-1206-10
Lower view of the conjugated instrument INS 2000
1 Symbol card
P4 Conjugated instrument INS 2000
| Remove and install | ||
1 | Memorize the parameters of the conjugated instrument INS 2000 (P4) | Only when the conjugated instrument INS 2000 (P4) is replaced. | |
2 | Lower the steering column towards the driver's seat | ||
3 | Remove the conjugated instrument edging INS 2000 (P4) | ||
4 | Remove the attachment screws (indicated by the arrows) | ||
5 | Remove the conjugated instrument INS 2000 (P4) from the support | ||
6 | Identify and separate the electric connections from the conjugated instrument INS 2000 (P4) | ||
7 | Identify the pilot-lights for special performance and remove them | If there are any. | |
8 | Remove the cable clamp from the conjugated instrument INS 2000 (P4) and remove it | ||
9 | Detach the adhesive tape from the lower part of the conjugated instrument INS 2000 (P4) and remove the symbol card (1) | Only when the conjugated instrument INS 2000 (P4) is replaced. | |
10 | Install in reverse order | ||
11 | Transfer the parameters to the new conjugated instrument INS 2000 (P4) | Only when the conjugated instrument INS 2000 (P4) is replaced. | |
12 | Perform the alternator "W" signal programming | Only when the conjugated instrument INS 2000 (P4) is replaced. |
Referenced documents
- ar5430b602702ta Save and transfer parameters of instrument (INS)
- ar5430b602704ta Perform teach-in process for terminal W conversion factor
- ar6810b155001ta Remove cover at instrument panel