ar5425p2803rt

Remove/install cruise control switch

Type ar · topic 54.25 · version 0101 · 2012-02-23

Applies to: MODEL 251

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.25 Switches — Series 251

EinPAS 28 Convenience system/driver assistance system › 28.25 Speed control › 28.25.12 Sensor/switch/wiring harness — Series 251

AR54.25-P-2803RT

Remove/install cruise control switch

16.2.12

MODEL 251

Remove/install cruise control switch

P54.25-4460-06

Shown on vehicle with electrically adjustable steering column, code 441

1 Driver airbag unit

2 Steering wheel

3 Clock spring contact

4 Steering angle sensor

5 Combination switch

6 Steering column adjustment switch

7 Bolts

8 DIRECT SELECT selector lever

9 CC [TPM] switch

N80 Steering column module

Remove/Install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground cable

AR54.10-P-0003RT

2

Remove DIRECT SELECT selector lever (8)

DIRECT SELECT selector lever (8) and cruise control pushbutton switch (9) form a unit which cannot be disassembled.

AR27.60-P-0931RT

3

Install in the reverse order

4

Perform basic programming

AR00.19-P-0200RT

Referenced documents