ar5418p0200sr

Remove/install car2go wiring harness

Type ar · topic 54.18 · version 0100 · 2015-07-15

Applies to: Model 453.3 (except 453.391) with code P02 (car2go)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.18 Cable harnesses — Series 453 (models 341, 342, 343, 344, 353, 362)

EinPAS 31 Communication/information/entertainment › 31.45 Taxi/rental car/driving instruction vehicle › 31.45.12 Sensor/switch/wiring harness — Series 453 (models 341, 342, 343, 344, 353, 362)

AR54.18-P-0200SR

Remove/install car2go wiring harness

2.7.15

Model

453.3 (except 453.391)

with code P02 (car2go)

Remove/install car2go wiring harness

P54.18-5400-09

1

Screw

6

Electrical connector

2

Fastening bracket

7

car2go electrical wiring harness

3

Trim piece

A40/3p1

Touchscreen

4

Fastening bracket

A50/5

Card reader

5

Electrical connector

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and remove ignition key from ignition lock

2

Remove touchscreen (A40/3p1) and instrument cluster (A1)

AR54.30-P-6015SR

3

Remove bolts (1) and remove mounting console (2)

Installation: Check electrical wiring harnesses are correctly seated.

4

Unclip trim piece (3) and remove

Clip remover

*452589016300

5

Remove card reader (A50/5) from windshield

AR54.30-P-2000SR

6

Remove mounting console (4) from instrument panel

AR68.10-P-1580SR

7

Disconnect electrical connections (5, 6)

8

Remove electrical wiring harness for car2go (7)

Installation: Check for correct seating of electrical wiring harness for car2go (7).

Use pulling-in aid for removal/installation.

9

Install in the reverse order

Remove/install car2go wiring harness

452 589 01 63 00

Clip remover

Referenced documents