Remove/install card reader on windshield

AR54.30-P-2000SR

Remove/install card reader on windshield

20.04.2017

Model

453.3/4

with code 54P (Line-Paket Mietmodell)

Model

453.3/4

with code 99O (car2go private/smart services share)

Model

453.3

with code P02 (car2go)

Modification notes

18.04.2017

Commissioning of card reader added.

Operation step 8

1

Spacer

2

Flap

3

Cover

4

Slider

5

Catch hook

6

Electrical connector

A50/5

Card reader

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Switch off ignition and remove transmitter key from ignition lock

2

Unclip flap (2) from rear catch hooks and set upright

 Installation: The spacer (1) must rest on the windshield.

 Clip remover

*452589016300

3

Unclip cover (3) from front catch hooks, lift and remove towards the rear

4

Pull slider (4) with card reader (A50/5) to the rear as far as the stop

 Installation: Push slider (4) with card reader (A50/5) forwards until the spacer (1) rests on the windshield.

5

Release catch hook (5) in direction of arrow and pull out card reader (A50/5) until electrical connector (6) is accessible

6

Disconnect electrical connector (6) and remove card reader (A50/5)

7

Install in the reverse order

8

Perform commissioning of card reader (A50/5) with vehicle diagnosis system

When replacing the card reader (A50/5).



AD00.00-P-2000-06SR