ar5415d0062ec

Remove/install 220 V circuit breaker

Type ar · topic 54.15 · version 0102 · 2019-12-12

Applies to: Model 903.6 with code ZL9 (James Cook touring camper)

Where it sits

Function group 2 Chassis › 54 Electrical system, equipment and instruments › 54.15 Fuse and relay box — Series 903 (models 6**)

EinPAS 25 On-board/network/multifunction › 25.20 On-board electrical system › 25.20.40 Electrical fuse/diode/resistor — Series 903 (models 6**)

AR54.15-D-0062EC

Remove/install 220 V circuit breaker

18.11.2019

Model

903.6

with code ZL9 (James Cook touring camper)

Remove/install 220 V circuit breaker

5

Bolts

6

Fault-current circuit breaker

D54.15-1123-06

Remove/install 220 V circuit breaker

4

Panel

6

Fault-current circuit breaker

7

Bolts

D54.15-1124-06

Remove/install

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

1

Disconnect external 220 V feed line from vehicle

See operator's manual.

2

Move bench seat forward

See operator's manual.

3

Disconnect ground lines from additional batteries

AR54.10-D-0007EC

4

Remove sheet metal (4) with battery main switch (S25/20)

AR54.10-D-0040EC

5

Remove bolt/bolts (5)

6

Pull out ground fault circuit interrupter (6) toward rear

7

Remove bolts(7)

8

Pull all lines out of ground fault circuit interrupter (6)

Mark positions of lines before removal.

9

Install in the reverse order

10

Carry out function check

With an external 220 V connection, the charger supply voltage symbol (see operator's manual) must appear on the display of the camper van operating and display unit (A97).

11

Program clock in camper van operating and display unit (A97)

See operator's manual.

12

Program switch-on times for stationary heater in camper van operating and display unit (A97)

See operator's manual.

Referenced documents