AR46.80-B-0540A | Removing, installing oil filter | 12.02.16 |
Vehicle 382.15# #D, 634.0## #D with CODE AN5 (Lifting trailing axle)
B46.60-0005-05
5 Hydraulic fluid filter
5.2 Filtering element housing
5.3 Sealing ring
5.4 Filtering element)
5.5 Housing
| Remove and install | ||
Danger! | Risk of accident by unintentional rolling with the engine running. Risk of injuries by crushing and burns caused by contact during the startup procedure or with the engine running | Secure the vehicle against unintentional rolling. Utilize closed and tight fitting work clothes. Do not touch heated or moving parts. | |
Danger! | Risk of injuries in the eyes caused by high pressure ejected steering box oil. Risk of poisoning by ingestion of steering oil | Unscrew the end of stroke bolt 5 turns at maximum. Use protection glasses. | |
1 | Remove the filter housing (5.5) | Catch the hydraulic fluid run-off in a suitable container. | |
Installing: Thoroughly clean the filter housing (5.5) and tighten it to the specified torque. | |||
| |||
2 | Detach the filtering element (5.4) from its housing (5.2) | Installing: Replace the filter sealing ring (5.3). | |
3 | Install in reverse order | ||
4 | Bleed the steering axle hydraulic system | ||
5 | Check the hydraulic system for tightness | Visual inspection. |
Auxiliary steering
Referenced documents
- ar4680b1200xa Bleed hydraulic system for auxiliary steering axle
- as0000b000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as4600b000101a Danger of injury to eyes caused by steering oil emerging at high pressure. Danger of poisoning caused by swallowing steering oil