ar4680b0500a

Remove/install hydraulic control block of auxiliary steering axle

Type ar · topic 46.80 · version 0103 · 2016-02-12

Applies to: Vehicle 382, 634 with Rear axle 749.282

Where it sits

Function group 2 Chassis › 46 Steering › 46.80 Auxiliary rear axle steering, auxiliary steering axle (ZL), electro-hydraulic auxiliary steering (EHZ) — Series 382 · Series 634

EinPAS 22 Steering › 22.20 Auxiliary steering › 22.20.30 Control block/actuator — Series 382 · Series 634

Also applies to engines/gearboxes: 749 282

AR46.80-B-0500A

Remove/install hydraulic control block of auxiliary steering axle

12.02.16

Vehicle 382, 634 with Rear axle 749.282

Remove/install hydraulic control block of auxiliary steering axle

B46.60-0006-05

1 Hydraulic control valve (22Y05)

2 Electric connector

3 Fastening bolt

4.1 Hydraulic piping

4.2 Hydraulic piping

4.3 Hydraulic piping

4.4 Hydraulic piping

Remove

Danger!

Risk of accident by unintentional rolling with the engine running. Risk of injuries by crushing and burns caused by contact during the startup procedure or with the engine running

Secure the vehicle against unintentional rolling. Utilize closed and tight fitting work clothes. Do not touch heated or moving parts.

AS00.00-B-0005-01A

Danger!

Risk of injuries in the eyes caused by high pressure ejected steering box oil. Risk of poisoning by ingestion of steering oil

Unscrew the end of stroke bolt 5 turns at maximum. Use protection glasses.

AS46.00-B-0001-01A

1

Clean the whole area around the control valve (1)

2

Detach the electric connector (2) at the control valve (1)

3

Detach the hydraulic line ends (4.1, 4.2, 4.3, 4.4) at the control valve

Pay attention to the correct hydraulic lines assembly position.

Plug the connection ends with suitable plugs.

Catch the hydraulic fluid run-off in a suitable container.

4

Unscrew the fastening bolts (3) and remove the control valve (1)

5

Remove the threaded connections of the control valve (1)

Installing

6

Install the threaded connections (4) with new sealing rings on the control valve (1)

*BA46.80-B-1010-01B

7

Install the fastening bolts (5)

*BA46.80-B-1009-01B

8

Install the hydraulic lines (4.1, 4.2, 4.3, 4.4) on the control valve (1)

9

Install the electric connector (6) on the control valve

10

Bleed the steering axle hydraulic system

AR46.80-B-1200XA

11

Check the hydraulic system for tightness

Visual inspection.

Rear axle auxiliary steering (HZL)

Número

Denominação

Vehicle 382.15, 634.0 with Rear axle 749.282

BA46.80-B-1009-01B

Hydraulic command valve in the support

Nm

127

BA46.80-B-1010-01B

Valve threaded joint

Nm

-

Referenced documents