AR46.35-P-1000RR | Remove/install steering assist control unit | 11.10.05 |
MODEL 452.3 /4 with CODE (V26) Power steering, EPS (FFO)
P46.35-2017-04
1 Fire extinguisher
2 Electrical connector
3 Electrical connector
4 Ground connection
5 Nut
N68 Steering assist control unit
| Remove/install | ||
| Information on preventing damage to electronic components due to electrostatic discharge | All models | |
1.1 | Remove fire extinguisher (1) from bracket | Only with equipment fire extinguisher with bracket on passenger side, code H13. | |
2 | Remove foot support on passenger side | ||
3 | Decontact electrical connector (2, 3) | Installation: Ensure that it is locked properly. | |
4 | Unscrew nut (5) and remove ground connection (4) | Installation: Ensure that the ground connection (4) is located between the nut (5) and the steering assist control unit (N68). | |
Installation: The line from the ground connection (4) must be routed and fixed in position so as to exclude damage and vibration noise | |||
5 | Remove steering assist control unit (N68) | Ensure that the felt strip on the back of the steering assist control unit (N68) is in the correct position and is not damaged. Replace the felt strip if necessary. | |
6 | Install in the reverse order | ||
7 | Read out fault memory | Remove faults in the control units as necessary. | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system |
Commercially available tools
Referenced documents
- ad0000p200004rr Connect STAR DIAGNOSIS and read out fault memory
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar6830p1340rr Remove/install footrest on passenger side