S42.20-2502-09
1 Lining
2 Lining
3 Hauling cable
4 Screw
9 Screw
10 Indicator switch cables
11 Adjustment screws
5 Handbrake lever
6 Indicator switch
7 Lining
8 Support
| Removing, installing | ||
Danger! | Danger of fatal injury due to slipping or tipping of vehicle off lifting platform | Align vehicle between lifting platform columns and position the four support plates at the lifting platform support points prescribed by the vehicle manufacturer | |
| Notes on lifting and jacking-up | Model 638 | |
1 | Raise vehicle | ||
2 | Release parking brake | ||
3 | Slacken off parking brake cables with adjustment screw (11) | ||
4 | Remove linings | Retainer tabs may break off | |
5 | Detach retaining clip with pin and remove front brake cable from handbrake lever | Use special tool to unclip plastic ring from cable guide. Replace damaged plastic ring. | |
Unclipping tool | |||
6 | Unscrew screws (9) at support (8) and detach handbrake lever (5) | | |
7 | Pull indicator switch cables (10) off indicator switch (6) | ||
8 | Remove indicator switch (6) | Squeeze retainer tabs together | |
9 | Remove lining (7) | ||
10 | Unscrew screws (4) and detach support (8) | | |
11 | Install in reverse order | ||
12 | Adjust parking brake |
Parking brake
Number | Designation | Model 638 | ||
BA42.20-N-1008-01B | Screw attaching handbrake lever to support | Nm | 27.5 | |
BA42.20-N-1009-01B | Screw attaching handbrake lever support to seat support | Nm | 7.5 | |
129 589 11 63 00
Referenced documents
- ah0060n010001a Special instructions for lifting and supporting vehicle
- ar4220s0540a Adjust parking brake
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.