ar4220l0525va

Removing and installing rear brake control cable

Type ar · topic 42.20 · version 0100 · 2003-03-13

Applies to: MODEL 414.700

Where it sits

Function group 2 Chassis › 42 Brakes - hydraulic and mechanical systems › 42.20 Parking brake — Series 414 (models 700)

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.16 Parking brake › 21.16.32 Brake lever/brake cable/pulley/brake pedal — Series 414 (models 700)

AR42.20-L-0525VA

Removing and installing rear brake control cable

7.9.00

MODEL 414.700

Removing and installing rear brake control cable

L42.20-0059-06

1 Trailing arm

2 Brake carrier

3 Front brake cable

4 Right rear brake cable

5 Left rear brake cable

6 Hexagon socket bolt

7 Cover plate

8 Brake shoes

9 Expanding lock

079 Remover

Removing, installing

1

Remove rear wheels

AP40.10-P-4050Z

2

Remove bottom sections of noise encapsulation

Only remove bottom sections of noise encapsulation at the rear.

AR94.30-L-5300VA

3

Release and detach parking brake cable

AR42.20-L-0540-04VA

4

Remove left and right parking brake shoes (8)

Remove expanding locks (9) for brake shoes on both sides.

AR42.20-L-0530VA

5

Disconnect left rear brake cable (5) from front brake cable (3)

6

Remove left and right rear brake cables

(5, 4) from retaining tabs on frame floor using remover (079)

*168589061400

7

Unclip left and right rear brake cables (5, 4) from anchor (arrow) of trailing arm (1)

8

Unscrew bolts (6) and detach left and right rear brake cables (5, 4) from brake carrier (2) and pull them through the cover panel (7)

9

Install in the reverse order

10

Adjust parking brake

AR42.20-L-0540VA

Removing and installing rear brake control cable

Sleeve

168 589 06 14 00

Referenced documents