Perform wheel alignment check · ar4020p0200mfa · Mercedes-Benz WIS

AR40.20-P-0200MFA

Perform wheel alignment check

27.05.2019

Model

118, 177, 247

	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Measure
1	Drive the vehicle onto measuring station and secure using parking brake.	 The measuring system must be approved by Mercedes-Benz.
2	Put transmission into neutral position.
3	Open window on driver's door.	 Preparations for checking steering lock.
4	Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).
5	Carry out conditions and tests for wheel alignment measurement.		AR40.20-P-0304-01MFA
6	Unlock turn and slip plates.
7	Rock vehicle to settle suspension at front and rear several times.	 In order to bring the vehicle into ready-to-drive condition.
8	Check vehicle level at front and rear axles using electronic inclinometer and adjust if necessary.
	000 588 05 19 00 Vehicle level inclinometer		WS40.00-P-0007B
			AR40.20-P-0304-02MFA
		Cleaner	*BR00.45-Z-1025-04A
9	Cover up the brake pedal and the front seat.	 Otherwise the brake pedal or the front seat may be damaged.
10	Install the brake pedal jack with the adapter for brake pedal jack between the brake pedal and the driver's seat.	 Do not load vehicle any more.
		 Brake pedal jack	*000589183100
		 Adapter for brake pedal winch	*211589003100
11	Attach Mercedes-Benz quick-clamp holders.		AR40.20-P-0230SX
12	Attach measuring heads.	 For attaching the measuring heads, see corresponding manufacturer's operating instructions.
13	Carry out input measurement.	 For carrying out the initial measurement, see corresponding dimensional check system operating instructions.
14	Compare determined values with the specified values.	Model 247	AR40.20-P-0203MB
		Model 177	AR40.20-P-0203MFA
		Model 118	AR40.20-P-0203MFI
15	Check camber on rear axle.	If the measurement result of the initial measurement is outside the tolerance.
			AR40.20-P-0304-05MFA
16.1	Check toe at rear axle.	Model 177, 247 with code U54 (Compound-link axle) If the measurement result of the initial measurement is outside the tolerance.
			AR40.20-P-0304-07MFA
16.2	Adjust toe on rear axle.	Model 118, 177, 247 with code U55 (Multi-link axle) If the measurement result of the initial measurement is outside the tolerance.
Topical note	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
Topical note	Notes on threaded connections fastened using a tightening angle-based tightening process		AH00.00-P-0020-01A
			AR40.20-P-0304-08MFA
		 Nut, tie rod to rear axle carrier	*BA35.20-P-1001-04N
17	Check camber at front axle.	If the measurement result of the initial measurement is outside the tolerance.
			AR40.20-P-0304-12MFA
18	Check caster at front axle.	If the measurement result of the initial measurement is outside the tolerance.
			AR40.20-P-0304-10MFA
19	Adjust toe on front axle.	If the measurement result of the initial measurement is outside the tolerance.
			AR40.20-P-0304-15MFA
		 Jam nut, tie rod	*BA46.40-P-1002-01Q
		 Retainer device	*129589012100
20	Check toe-out angle.	If the measurement result of the initial measurement is outside the tolerance.
			AR40.20-P-0304-16MFA
21	Carry out output measurement.	If the specified values for the vehicle are not attained,
		
		Repeat operation steps 15 to 21.
22	Detach measuring heads.
23	Detach Mercedes-Benz quick-clamp holders.		AR40.20-P-0230SX
24	Remove brake pedal jack with adapter for brake pedal jack.	 Brake pedal jack	*000589183100
		 Adapter for brake pedal winch	*211589003100
25	Remove cover from brake pedal and driver's seat.
26	Lock turn and slip plates.
27	Drive vehicle off measuring system.
28	Check headlamp adjustment and correct if necessary.
		Model 247	AP82.10-P-8260AO
		Model 177	AP82.10-P-8260N

 Tie rod

Number	Designation			Model 118, 177, 247
BA35.20-P-1001-04N	Nut, tie rod to rear axle carrier	Stage 1	Nm	50
		Stage 2	°	90

 Front axle tie rod

Number	Designation		Model 118, 177, 247
BA46.40-P-1002-01Q	Jam nut, tie rod	Nm	60

000 589 18 31 00

Brake pedal jack

211 589 00 31 00

Adapter for brake pedal winch

129 589 01 21 00

Retainer device

Repair materials

Number	Designation	Order number
BR00.45-Z-1025-04A	Cleaner	A 005 989 19 71

Referenced documents

ah0000n000101a Notes on self-locking nuts and bolts
ah0000p002001a Notes on threaded connections fastened using a tightening angle-based tightening process
ah0000z001901a Notes on safety-relevant components
ap8210p8260ao Check and correct the adjustment of the headlamps
ap8210p8260n Check and correct the adjustment of the headlamps
ar4020p0203mb Assign suspension data
ar4020p0203mfa Assign suspension data
ar4020p0203mfi Assign suspension data
ar4020p0230sx Attaching Mercedes-Benz quick-clamping devices
ar4020p030401mfa Establish preconditions and perform checks for wheel alignment measurement
ar4020p030402mfa Check vehicle level at front and rear axle with electronic inclinometer, adjust if necessary
ar4020p030405mfa Check rear axle camber
ar4020p030407mfa Check rear axle toe
ar4020p030408mfa Check and adjust toe at rear axle
ar4020p030410mfa Check front axle caster
ar4020p030412mfa Check camber at front axle
ar4020p030415mfa Check and adjust toe at front axle
ar4020p030416mfa Check toe-out angle at front axle
ws4000p0007b 000 588 05 19 00 Vehicle level inclinometer